Request a quote for your projectMessage on WhatsApp

Industrial water filtration

What will you use the water for, and how much will you need at the busiest hour? We’ll help you choose the equipment and prepare a quote for your site.

Industrial reverse osmosis
Installed at a business with 50 employees.

Water treatment equipment

The equipment photos below come from the supplier. See Filac installations in Armenia

KSRO-4000 and KSRO-6000 with their control panels and pressure gauges
KSRO-4000 and KSRO-6000

KSRO reverse osmosis system

In a KSRO system, pressure forces water through a membrane that retains most dissolved salts. Filac has installed systems from this range at three sites in Armenia.

KSRO-4000 · treated water
650 L/h
KSRO-6000 · treated water
1,000 L/h

These ratings assume the specified membranes. Actual output also depends on the composition and temperature of the incoming water.

Request a project quote
Metering pump and level switch mounted on the chemical tank
Metering pump and chemical tank

Chemical dosing system

An adjustable metering pump feeds a measured amount of treatment chemical from a storage tank into the water line. A switch monitors the liquid level. We select the tank and dosing rate for the application.

Chemical output at 7 bar
2 L/h
Tank capacity by model
60–200 L
Request a project quote

Pretreatment filters

Blue fibreglass vessels with control valves from the multi-media filter range
Vessels used in the Multi-Media range

Multi-Media sand filter

Layers of quartz sand and graded gravel trap suspended particles that make water cloudy. Backwashing carries the collected sediment out through the drain.

Service flow by model
1–25 m³/h
Request a project quote
Installed blue vessel with its Clino-X Sand Filter identification plate and pipework
Clino-X filter in a treatment system

Clino-X mineral media filter

A bed of Clino-X mineral media sits above sand and fine gravel. It captures fine suspended particles, with a nominal particle rating of 3–5 µm.

Service flow by model
1–25 m³/h
Request a project quote
SWDF unit with horizontal membrane housings and control cabinet on its blue frame
SWDF series desalination unit

SWDF seawater desalination system

SWDF produces fresh water from seawater. A high-pressure pump feeds seawater through reverse osmosis membranes mounted on a modular frame. We size the system for the feed salinity and the volume of fresh water the project needs.

SWDF-120 · fresh water
5 m³/h
SWDF-300 · fresh water
12 m³/h

These ratings assume seawater with 35,000 mg/L of dissolved solids and 35% recovery, meaning 35% of the incoming seawater becomes fresh water.

Request a project quote

What to include in your request

Tell us where and how you plan to use the water. If you know the source, daily consumption or busiest-hour demand, include those details. You can also attach an existing water analysis in WhatsApp.

If you’re still working out the volumes, start with what you need the water for.

Where to put a drinking-water point in an office

Request a project quote
Message on WhatsApp

Book your free water check

Prepare your request, then continue in WhatsApp. You’ll arrange the visit with Filac.

You can read and edit your message in the next step.

Or call: +374 33 031031